4
Headband
The Stratus Ultra-G headset can also be equipped with a lightweight
flexible headband.
Installation
1. Remove the ear capsule.
2. With the corded side of the receiver facing you, hold the headset in your
left hand between your thumb and index finger with the boom pointing
to the right.
3. With your right hand, hold the headband so that the C-ring opening is
facing towards the receiver (see Figure 7).
4. Push the C-ring of the headband onto the receiver housing until it springs
into place in the groove.
5. Snap the large cushion onto the speaker housing until it clicks into place.
Removal
1. Remove the ear cushion.
2. In the left ear wearing style, with the corded side of the receiver facing
you, hold the headset in your left hand between your thumb and index
finger with the boom pointing to the left.
3. With your right hand, hold the headband between your thumb and
index finger.
4. Pull up on the receiver and push down on the headband until the C-ring
snaps off of the receiver housing (see Figure 8).
Figure 7
Installing Headband
Figure 8
Removing Headband
