b.We recommend the microphone volume to be set to
7
out of 13
Guided setup:
As a part of the installation, you can dial into your local Jabra Setup server
which will configure the audio path. Please follow the instructions shown
on the display. If your Jabra Setup server is unavailable, please contact
your local Jabra Support team.
Phone settings with device software version 9.xx and higher:
Phone settings are no longer required. Once the phone connector has
been inserted correctly, a headset symbol should appear in the “phone”
display. If the headset symbol does not appear, please check the following
settings:
Menu>Settings>Phone>Phone connector>Activate/select headset
Phone settings with device software version lower than 9.xx:
Please note that the “Force Headset” function must not be activated on
the device as this will prevent you from accepting external calls.
Menu>Settings>Phone>Phone connector>Force headset OFF
Menu>Settings>Phone>Socket>Activate headset
Ringtone signal / phone settings:
Please note that the ring tone signal ont eh headset will only be
06/04/2021 16:25
https://www.jabra.ca/supportpages/jabra-go-6470/6470-15-207-505/faq/63cea1ea-94dc-
4d4e-88b3-86766af1b3f4
Page 3 of 4
