Set the phone setup switch (A-G) to "A".
Headset answer/end:
As soon as the dial tone signal can be heard in the headset, you can answer
the call by pressing the ”answer/end” button on the headset; by pressing
again the call is ended.
Phone setup with system software version 9.xx and higher:
No settings are required on the phone for the use of a headset. Following
the correct adaptation of the audio jack, a headset symbol should appear
in the “phone display”. If the headset symbol does not appear, please
check the following settings:
Menu> Settings> Phone> Audio Jack> Select / Activate Headset.
Phone setup with system software below version 9.xx:
Important:
The “Force Headset” function must not be activated on the
phone, as otherwise it will not be possible to accept external calls.
04/11/2022 08:29
https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/2188ed47-
9bb4-4f91-bf14-ca96af19c4b8
Page 3 of 4
