2
Microphone Positioning
To take advantage of the noise canceling qualities of the microphone, position
the Orator-G headset with the flat side of the microphone, marked with an F,
facing you. The microphone boom should be adjusted so that the microphone
is approximately one finger width away from your lower lip (see Figure 5).
The Orator-G has a flexible boom that can be reshaped until the microphone is
correctly positioned in front of your mouth. One hand should grasp and steady
the receiver end of the boom. The other hand can then flex the boom (see
Figure 6).
CAUTION: Never forcefully rotate the microphone boom past its stop point in
the receiver assembly!
Clothing Clip
The clothing clip should be fastened for comfortable wearing (see Figure 7).
It is designed to prevent the weight of the cord from dislodging the headset.
Position the clip conveniently on your clothing. To reduce excess slack,
reposition the clip by sliding it up and down the cord.
Figure 6
Figure 5
Microphone Positioning
1 Finger
Width
Figure 7
Clothing Clip
Orator-G 12/1/00 2:25 PM Page 2
