No settings are required on the phone to use a headset. Following the correct adaptation of the
audio jack, a headset symbol should appear in the “Phone display”. If the headset symbol does
not appear, please check the following settings:
Menu> Settings> Phone> Audio Jack> Headset/Activate/Select.
Phone setup with system software version below version 9.xx:
Important:
The “Force Headset” function must not be activated on the phone, as otherwise it
will not be possible to accept external calls.
Menu> Settings> Phone> Audio Jack>Force headset OFF
Menu> Settings> Phone> Socket > Activate headset
Dial tone signal transfer/ phone setup:
Important:
The dial tone signal in the headset is only transmitted if one of the following
ringtones is used, e.g. Standard/ Classic / Cold River / Dooing-Dooing. > Menu> Settings> Dial
Tone > Internal / External
Should the dial tone signal transfer not work although you have setup the correct ringtone, please
check the following settings:
Menu > Settings > Phone > Internal/External, more options
No sound, Progressive, Beeps> all points must be set to "OFF".
Calls being made via the headset can be connected / forwarded as follows:
Dial the phone number > "Forward" will now appear in the phone display > now press on to the
appropriate function key next to the phone display > thereafter you must end the call with the
button marked "Handset".
Was this useful?
How to connect my Jabra PRO 92x with Alcatel Touch 4029, 4039
Prerequisite:
Jabra PRO 92x + Jabra LINK 14201-09
In combination with one of the following phones:
Summary of Contents for Pro 92 Series
Page 48: ......
