4.
Use EITHER the up or down volume button (quick press and release) to cycle through the next
menu. You will hear the values below and see the battery light on the base unit change colour
accordingly.
When you hear ‘GN1000/RHL/NONE’ stop
5.
Press and hold the volume buttons until you hear the headset say ‘GOODBYE’
6.
Wait a moment as the base will restart an update the settings.
NB
Yealink EHS 36 uses DHSG,
Handset lifter uses GN1000/RHS/None
Most other EHSs use DSHG or MSH
