of the universal adapter marked with the “headset” symbol
2. Insert the RJ10 plug into the socket marked with the “phone” symbol
and the RJ45 plug into the socket marked with "AUX" on the base
Manual configuration
:
The appropriate EHS mode should now be installed, to do this select
Siemens Optipoint mode as described.
Base setup
:
Set the phone set-up switch to position "A".
Microphone level setup:
Remove the cover from the base of the Jabra PRO 9450 and make a call
with the headset, to a colleague for example. If you are too loud or too
quiet to the person you are calling, press the volume adjuster until you
achieve the optimum volume level.
24/05/2021 09:09
https://www.jabra.no/supportpages/jabra-pro-9450/9450-29-707-101/faq/2709415d-
7235-4e16-8118-ec6fb7422f8a
Side 2 av 3