11
EN
G
LI
SH
JABRA PRO 9450
2. CONNECTING
LAUNCH THE INTERACTIVE SETUP WIZARD ON THE CD FOR ANIMATED SETUP INSTRUCTIONS
The easiest way to connect and configure the Jabra PRO 9450 is to use the Interactive Setup Wizard on the
installation CD. Chapters 2 and 3 of this manual are only needed if the Interactive Setup Wizard is not used.
Refer to the Warning and Declaration guide for important safety instructions prior to installation and use of the
Jabra PRO 9450.
2.1 CONNECT TO POWER
Connect the Power Adapter to the Base
1. Plug the supplied power adapter into the port marked
on the base.
2. Connect the power adapter to the mains power socket.
2.2 DOCK HEADSET
Dock the headset, as illustrated. When the headset is docked correctly the headset battery will begin charging, if
needed. Keep the headset docked while connecting the Jabra PRO 9450, or when not in use.