27
english
Jabra PrO 9460, 9460-DuO, 9465-DuO anD 9470 user manual
connecting the BaSe to youR coMPuteR
4.7
Connect the touchscreen base to your computer if you would like to use your headset together with a softphone
running on the PC. you can also use this connection to configure your headset and base and to update their
firmware.
Figure 31: Connecting to a computer
to connect the Jabra PrO base to your computer:
1. Connect the small connector of the supplied usb cable to the port marked
on the Jabra PrO base.
2. Connect the other end of the usb cable to any free usb port on your computer.
3. Install the Jabra PC suite software on your computer (see
Chapter 5: Installing and Running the Jabra PC Suite
).
connecting JaBRa PRo 9465-duo oR 9470 to a MoBile Phone
4.8
the Jabra PrO 9465-Duo and 9470 touchscreen bases feature
Bluetooth®
and can therefore be used with any
mobile phone that also supports bluetooth® wireless technology. you must set up the wireless communication
between the two devices by
pairing
them. the setup wizard helps you to do this during initial setup and can
repeat the procedure at any time later.
see
Chapter 9: Using Jabra PRO 9465-Duo or 9470 with a Mobile Phone
for details.
uSing a ReMote BuSy light indicatoR
4.9
a remote busy light indicator connects to your base via a cable and lights up to show colleagues when you are
on the phone.
to connect a busy light indicator to your base:
1. unpack and assemble your busy light indicator as described in its documentation.
2. Connect the cable from your busy light indicator to the port marked
on the Jabra PrO base.
see also the documentation that came with your busy light indicator for more information about that product.
