31
english
Jabra PrO 9460, 9460-DuO, 9465-DuO anD 9470 user manual
Note:
if the target phone is shown greyed out on the touchscreen, it means that the phone has become
disconnected. this can only occur with mobile- or softphones. you need to either re-connect the phone
or touch another phone on-screen to select a different target. see the figure below.
A disconnected target phone is shown greyed out on the touchscreen
Figure 36:
how to Make a call
6.3
Calling through a Desk Phone
Figure 37: Placing a call with your headset and desk phone
to place a call through your desk phone:
1. If necessary, set the desk phone as the current target for your headset (see also
Section 6.2: The Target Phone
Concept.
)
2. to get a dial tone:
If you are using a handset lifter or electronic-hookswitch:
Open the audio link to the headset by doing
one
of the following:
- tap the headset’s multifunction button,
or
- touch the call icon on the base touchscreen,
or
- lift the headset from the cradle on the base (if automatic opening of the audio link is enabled, see
Section
8.13: Headset Docking-operation
).
you should now hear a dial tone.
