34
english
Jabra PrO 9460, 9460-DuO, 9465-DuO anD 9470 user manual
to answer a call from any connected phone:
1. you will hear a ring tone from the target phone, Jabra PrO base and/or headset. usually, the touchscreen
indicates which phone is ringing and (if possible) shows the incoming phone number. the ringtone played in
the headset normally also indicates which phone is ringing (see also
Section 7.3: Headset Controls and Signals
).
Do one of the following:
-
For desk phones without automatic ringtone detection
In this situation, you will hear your desk phone ring but will not hear a ringtone in your headset or see
a ring indicator on the touchscreen. set the desk phone as the current target by touching the desk phone
icon on the touchscreen or
pressing
the headset’s multifunction button until you hear the desk phone
audio indicator (see also
Section 6.2: The Target Phone Concept
). this is not necessary if you have a gn1000
handset lifter or electronic hookswitch connection that supports ring detection.
-
For all other types of phone
the base automatically switches the target phone to the one that is ringing, as indicated by the touchscreen
icon and ringtone in the headset. you do not need to change the target manually.
2. Do one of the following to answer the call:
- Open the audio link to the headset by doing
one
of the following:
- tap the headset’s multifunction button,
or
- touch the answer-call icon on the base touchscreen,
or
- lift the headset from the cradle on the base (if automatic opening of the audio link is enabled, see
Section
8.13: Headset Docking-operation
).
- then (for desk phones without handset lifter or electronic hookswitch) lift your handset from the receiver,
setting it aside — or press the headset button, if your desk phone has one.
hanging uP
6.5
Figure 42: Hanging up
