56
english
Jabra PrO 9460, 9460-DuO, 9465-DuO anD 9470 user manual
to run some or all of the setup wizard:
1. wait until you have no active calls and will not need the phone for a few minutes.
2. touch the
icon in the upper-right corner of the touchscreen (available only when all lines are idle).
3. the
Settings
menu opens. touch on
Advanced
here.
4. the
Advanced Settings
menu opens. select one of the following:
- Setup Wizard:
runs the whole setup wizard.
- Reset Configuration:
touch here to clear all base settings (only) and launch the complete setup wizard.
- Setup Desk Phone:
touch here to reset your desk phone configuration (including all clear dial-tone switch,
electronic hookswitch and microphone-level settings). the desk phone part of the setup wizard then
launches. all other settings will be kept.
- Setup Softphone:
touch here to reset your softphone configuration and re-launch the softphone part of the
setup wizard. all other settings will be kept.
- Setup Mobile Phone:
touch here to reset your mobile phone configuration (Jabra PrO 9465-Duo and 9470
only). the mobile phone part of the setup wizard then launches. all other settings will be kept.
-
Headset intro:
a short series of screens that show you how to answer/end a call, adjust volume, and mute/
unmute a call just using the headset. Optimal positioning of the headset microphone and rotation of the
docking cradle for left ear use are also shown.
5. follow the instructions on your screen for the wizard you selected. see also
Section 4.1: Setup Overview and
Background
and
Section 4.2 The Quick-Start Setup Wizard
for background information that may help as you
work through the setup wizard.
BaSe audio indicatoRS
8.10
the base includes a small speaker, which enables it to supply one or both of the following:
- a ringing sound to indicate an incoming call (can be especially useful when you are using a softphone or have
the ringer disabled on your desk or mobile phone).
- a soft clicking sound to provide feedback when you use the touchscreen. this can help make using the
touchscreen feel more like working with a physical control panel.
you can choose to enable/disable one or both of the above audio features by adjusting your personal settings.
see
Section 8.5: Setting Active-Call and Audio Preferences
for details about how to do this.
naRRowBand vS. wideBand audio
8.11
the Jabra PrO headset supports both wideband and narrowband audio, but uses narrowband by default.
you should consider using wideband if you listen to music from your PC and/or if your voice-communication
channels also support it. note, however, that wideband audio reduces battery talktime.
you are able to configure narrowband/wideband operation individually for each phone type.
see
Section 8.8: Setting General User Preferences
for details about how to find these settings.
confeRence calling
8.12
the Jabra PrO touchscreen base enables you to connect a secondary Jabra PrO headset to the base, thereby
adding another person to the conversation.
to make a conference call connection:
1. Dock the second headset with the base that is to host the call.
you can do this either just before the call or at any time during the call.
the touchscreen asks whether you want to pair the headset as primary or secondary headset (see
Section 8.4:
Pairing and Connecting the Base and Headset
for more).
2. select
Sec.
on the touchscreen.
the base pairs with the secondary headset (this takes a few seconds). when paired, a double-tone signal is
heard once in the primary headset.
3. tap the mfb on the primary headset within 10 seconds of hearing the double-tone signal to accept the
secondary headset.
all audio is now shared by both connected headsets until one of the following occurs:
- the primary headset user hangs up.
- the secondary headset user taps the mfb on his or her headset.
- the secondary headset user docks his or her headset to its own base.
when the conference call connection is broken, the secondary headset is permanently removed from the host
base. you must repeat the procedure given above in full each time you want to make a conference call.
