5
JABRA SPORT W
TURNING YOUR JABRA SPORT W ON AND
OFF
To turn your Jabra SPORT W on press the On/Off button
(A) until the indicator light flashes Blue . After the headset has
turned on the indicator light will flash green if the battery is
medium/high or red if the battery is low . To turn your Jabra SPORT
W off press the On/Off button until the indicator light
flashes Blue .
PAIRING YOUR JABRA SPORT W TO A
PHONE OR OTHER DEVICE
Headsets are connected to phones or other Bluetooth devices
using a procedure called ‘pairing’ . By following a few simple steps,
pairing can be done in a matter of seconds .
Put the headset in pairing mode
1 The first time the the Jabra SPORT W is turned on
it will automatically enter pairing mode . For later pairing,
make sure the Jabra SPORT W is off . Put the SPORT
W into pairing mode by press-and-holding the
Answer/End button (A) until the indicator light flashes blue .
2 Search for Bluetooth devices on your phone* or other device
and select the Jabra SPORT W .
3 If prompted for a PIN code, please enter 0000 (4 zeros) and
confirm .
4 After pairing is complete, the Jabra SPORT W will
automatically connect to the device when turned on .
* Follow your phone’s instruction guide. First make sure that Bluetooth is
activated on your mobile phone. Then set your phone to search for the headset.
This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your
phone and selecting the option to search for or ‘add’ a Bluetooth device.
Note:
All communications between your Jabra SPORT W
headset and mobile phone are encrypted, so others will not be
able to intercept and understand your conversation . Establishing
this encryption is an important part of the pairing process .
* Refer to phone’s user manual
