14
English
15
English
9.1
9.2
9.3
9.
Reset / Pairing
9.1
Remove snap-on cover. Press
reset button on headset for 3 sec.
Visual indicator on headset will
flash red/green rapidly.
1)
9.2
Then press reset button
on base unit for 3 sec. Visual
indicator on base unit will flash
red/green rapidly.
9.3
Make sure headset and base
are within 1 meter/3 feet of each
other. When pairing is successful,
both visual indicators will flash
green 10 times, and the visual
indicator on base unit will turn to
steady green.
1)
Note:
The headset is already paired with the base unit from the factory. Pairing should only be necessary if
a new headset has to work with an existing base unit (or vice versa).
~ 3 sec
~ 3 sec
1 m / 3 feet
10.
Using the Jabra T5330 Multiuse with multiple Bluetooth-enabled devices
Your Jabra T5330 Multiuse can be paired with up to 8 devices. However, only two can be connected
(paired with the headset, turned on and in range) with the headset at one time. This could be any
two Bluetooth® devices (for example, a mobile phone and the Jabra T5330 Multiuse headset base,
or a Bluetooth-enabled PC and a mobile phone or two mobile phones).
This means that when the headset is in range of the T5330 Multiuse headset base, only one
mobile phone or Bluetooth-enabled device can be connected to the headset (paired with the
headset, turned on and in range) if you want to use your Jabra T5330 Multiuse with your desk
phone.
The headset is per default paired with the headset base. This means that the headset will
automatically connect to the base if in range and turned on. If you want the headset to be
connected to two other devices (than the headset base) you need to manually close down the
connection from the headset to the base. You can do this by pressing and holding the volume
up/down button simultaneously for 4 seconds.
To reestablish the connection to the base, simply repeat the procedure by pressing and holding
the volume up/down button simultaneously for 4 seconds.
11.
With two mobile phones
You can have two Bluetooth enabled mobile phones connected (paired with the headset, turned
on and in range) to the Jabra T5330 Multiuse simultaneously.
Last Number Redial* will dial the last number dialled when the headset was connected to any
mobile – not necessarily the last number dialled on the mobile phone you are using with the
headset at the time.
*
If the mobile phone supports this feature
NOTE:
When multiple Bluetooth-enabled devices are paired with the headset, the Voice Dial*
function will work with the last device that was paired.
