Location of product emblem
and VIN code
1. Location of product emblem: In a
position that is exterior side of the
rear side of the right longitudinal
member on the frame. As shown in
the following diagram;
Please find the location on vehicle.
Product emblem
Independent small emblem
2. Location of VIN code: Steel seal of
VIN codes for chassis of cargo truck
without box, cargo truck, transport
van and stake truck is printed on ex
鄄
terior side of frame's right longitudi
鄄
Position to paste the emblem
Position to p aste inde
鄄
pendent small emblem
92
OWNER
爷
S MANUAL for
HFC1061,HFC1063,HFC1083
series trucks
Note:Any user who use JAC com
鄄
plete vehicle or chassis should not
change emblem or symbols adopted
by JAC. Otherwise, the user will
take all of the responsibilities.
nal member and rear side of the rear
bracket of the rear leaf spring (VIN
codes for other refitted vehicles can
be printed on position near the front
leaf spring at the premises that relia
鄄
bility, safety and comfort of products
can be guaranteed)
Additionally, for trucks, of which total
masses are less than 3.5t, indepen
鄄
dent emblem
of VIN codes are pasted on the in
鄄
strument panel near the column. Re
鄄
fer to the diagram above.
93
