Error Code
Description
Solution
Err-01
Hardware
overcurrent
1
、
Power off, restart 2
、
Under normal condition, check voltage, low
voltage is 176 v, high voltage is 264 v 3
、
Turn the handwheel to see
whether mechanical parts is stuck 4
、
Check the motor plug 5
、
Factory
reset
、
test the motor angle 6
、
Replace the electronic control box
Err-02
Software
overcurrent
Err-03
system under
voltage
Err-04
Over-voltage when
the machine is
off
Err-05
Over-voltage in
operation
Err-06
Magnet circuit
fault
1
、
Check whether the plug, pin is fall off2
、
Unplug the electromagnet
plug to see if is still in an error 3
、
Replace the electromagnet4
、
Replace the electric control
Err-07
Power measuring
detection
circuit fault
1
、
factory reset2
、
Replace the electric control
Err-08
Sewing motor
blocked
1
、
Turn the handwheel to see whether mechanical parts is stuck 2
、
Check
the motor plug
3
、
Factory reset
、
test the motor angle 4
、
Replace the motor 5
、
Replace
the encoder6
、
Replace the electric control
trouble removal