7/7
4 Pedal sensitivity adjustment
Pedal starts moving from the initial position (p.136) where the motor stops, slowing forward to the low speed point (p.137)
where the motor run as the minimum speed (p.100), continuing to the accelerated point (p.138) where the motor start to speed up,
until the max speed point (p.139) where the motor run up to the maximum speed (p.101). And when the pedal steps back to the foot
lifter position (p.135), the presser foot lift. Continuing back to the auto trimming position (p.134), the line is cut. Adjusting the
corresponding parameters, user can acquire the proper pedal response to fit the personal habit.
Fig. 4-1 pedal movement of each position parameter
Fig. 4-1 pedal movement of each position parameter
386P0198B
2015-10-28
Интернет магазин промышленного швейного оборудования http://procapitalist.ru/sms
