JackaJay USER GUIDE
12
3.6.2.2 Undervoltage 2
In the case whereby the battery is completely exhausted, or the
batteries supply voltage has dropped below 9V, all operations
at this stage are inhibited, and the controller will not provide any
power to the motors that may cause harm to the system.
The Screen and controller will continue to function though, for
diagnostic purposes until the supply voltage drops below 5V.
The camper trailer battery must be charged.
IMPORTANT NOTE:
On the HOME page, a battery may display a voltage
of 10V or higher if it has no load on it. However, if a battery is exhausted, the
battery voltage will drop when placed under a load (JACKAJAY operation).
You may get an Undervoltage Trip and return to the HOME page to discover
that the Battery Voltage is above 10V. This means that during the Automatic
operation the battery voltage dropped below the set point and activated the
trip. Therefore, you must charge your battery.
f an undervolt 1 trip occurs, all lift functions will be
inhibited while all lower functions will be available.
This outcome is designed to cater for you in case you
have exhausted your battery or dropped one cell. It
enables you to get the roof down and get your camper
home. Please note, It is not recommended to operate
your JackaJay system in this current state for more then
one operation.
The camper trailer battery must be charged.
