JackaJay USER GUIDE
15
4.3
Fault and Error Detection
The JackaJay lift system is fitted with 2 smart Fault detection systems. They
are as follows:
Lift Fault Detection or Overload –
If activated, all lift movements are halted. The system will then
reverse / lower the roof away from obstruction.
The user will be notified that there is a Fault in the corresponding
corner on the LCD touchscreen automatic operation page.
You will have to conduct an investigation to find out the cause.
If the cause can be removed. The user can press the CLEAR
button on the screen and then the BACK button to return to the
HOME page. The next operation can then be selected.
For common causes please see section 3.6.1
Undervoltage Detection –
If an Undervoltage is detected please follow the prompts and
refer the section 3.6.2
If you are unable to charge the battery and recover full
operation of the JackaJay controller, please proceed to use the
provided JackaJay jumper lead to provide an auxiliary power
source (E.g. car battery) to operate the controller. See section
4.4. for details.
