JackaJay
INSTALLATION GUIDE
30
Check the prompts and press the COMMENCE ROOF LOWER button.
As the roof comes down, walk around the camper trailer, and tuck the
canvas away inside the camper, check for any other obstructions.
When all 4 corners are fully down, the touchscreen will display ROOF
LOWER COMPLETE.
You have completed a ROOF Lower function.
Conduct A ROOF LIFT automatic function and put the roof back up.
You have now conducted the full operation of the JackaJay lift system.
If you have any issues or concerns, please refer to the Troubleshooting
Guide or contact your nearest supplier or Jacka Industries Pty Ltd for
direction.
Replace all panels, cabinetry, and upholstery. And untie curtains.
Remove the plastic hatch cover where the old winch handle was used to
wind up the roof. Replace the plastic hatch with the ‘JackaJay’ Plaque.
Place a line of clear silicon around the outer edge of the plaque and
secure it to the Camper Trailer with 4 x black screws. Clean up excess
silicon.
YOU ARE NOW READY TO USE YOUR NEW JACKAJAY SYSTEM.
REFER TO JACKAJAY USER GUIDE supplied with this system.
Custom Installation
During the above sections of the Installation Guide, if you have any questions
and queries that you feel as though your camper trailer has an issue that is not
addressed or differs from our directives, please contact your nearest supplier or
Jacka Industries for direction.
