JackaJay
INSTALLATION GUIDE
9
3 Installation Setup
Please note that this Chapter is for guide purposes only. There may be individual
circumstances / layout / equipment that could require you seek further assistance
outside of this guide. For any queries please contact your local provider or Jacka
Industries Pty Ltd. Please note, this guide is based on the installation in a Jayco
Swan Outback.
3.1 Open JackaJay kit and read all User and Installation guides.
3.2 Identify a flat and level location
3.3 Expose manual winch system.
Open the JackaJay kit, layout all the components and understand the
location and use for each piece. This will assist you in ensuring that no
pieces are missing. This guide will show you all that is required.
It is critical, when putting up a camper trailer to always ensure that you
have a flat and level location and if required, use the levelling legs to
prop the camper into position.
Remove any panelling that is required to gain access to the entire
manual winch system. That is:
-
Cabinetry doors
- Covers.
- Appliances.
-
Beds and mattresses.
-
Seat cushions, etc
DO NOT DISCARD all these need to be refitted.
The JackaJay lift system installation may only require slight alterations of
panels and / or cabinetry.
JackaJay fits into the same area as the old winch & cable mechanism.
STOP POINT 1
STOP POINT 2
Ensure that all componentry is accounted for in the
JackaJay kit.
Ensure Camper Trailer is LEVEL in both horizontal axis –
sideways and lengthways.
Tick here
Tick here
