LCD Screen
Other
Power of Input
Output (W)
Low & High
Temperature Alarm
The E1500 can power your devices
at temperatures ranging from
-10 ~ 40 ℃. If your working
temperature is outside this range,
the unit may stop working. Also
please kindly recharge your
Explorer 1500 within 0 ~ 40 ℃.
Please hold the display power
button and USB button
simultaneously for 13s above to
reset the battery.
Power Level Percentage
Check the battery level by
pressing the display button before
use. If battery is at a low level,
charge first.
LCD screen flickers around 10
times when the battery capacity
drains to 20% to 10%.
Please ensure that power
consumption is less than 1800W,
then press the power button.
If the Jackery Explorer total
output exceeds 1800W, it will shut
off.
Fan Operating Principle
E1500 uses intelligent temperature
control. When the AC is turned on,
the fan does not turn on. Only when
the temperature rises to a certain
degree then the fan starts to turn
on.
How to reset the Explorer 1500
When the power station can't work
properly,you can choose to reset the
battery to trouble shoot.
When should we need to reset
the power station?
HOW TO USE THE POWER STATION?
Start use the Explorer 1500
How to check the E1500 is full charged?
The display screen shows 100% when fully recharged.
Power
LCD Screen Button
Press the power button to check the remaining
battery.
AC/ DC /USB Button
Turn on each output by pressing its power button ,
also turn off as it will not turn off automatically or
it will drain the battery out.
Note: For power saving, Explorer 1500 portable power station will be turned off automatically in 12 hours when being
drawn under 25W power.
hello@jackery.com
hello@jackery.com
*If the input power of the Explorer 1500 is within the range of 12-51V, it can be recharged.
