08
Parallel port
（
DC 8020 female
）
The solar panel charging
output port(DC8020 male,
with DC8020 to DC7909
Adaptor)
Users who have purchased Jackery SolarSaga 80 can charge the product by referring to the
connection mode shown below. The Jackery SolarSaga 80 supports the parallel connection or the
parallel and then series connections to charge the product. The single input port of the Jackery
Explorer 3000 Pro supports the input of up to six pieces of SolarSaga 80 solar panels, and two input
ports support the input to up to 12 pieces of SolarSaga 80 solar panels. (When the power is
connected with six solar panels in a single input port, the solar panels shall be divided into two
groups, and each group of three solar panels shall be self-connected in parallel and then connected
to Jackery Explorer 3000 Pro through the solar series connector. The solar series connector needs to
be purchased separately.)
For detailed operation instructions on the self-parallel connection of the Jackery SolarSaga 80 solar
panel, please refer to the user manual.
Jackery SolarSaga 80 Solar Panel Connection Guide
GB
SolarSaga×3
SolarSaga×1
Explorer 3000 Pro
SolarSaga×3
SolarSaga×2
Explorer 3000 Pro
