Jackery JS-80A, User Manual

A reflective lined storage bag is provided for the product to improve power generation efficiency through reflecting light.

Since the sun angle in a day changes, we recommend using the mode in Figure 4 in both morning and afternoon. (You 

can adjust the reflective angle by adjusting the position of the magic strap) and the mode in Figure 5 in the midday.

TWO-SIDE POWER GENERATION TECHNOLOGY

GB

SAFETY TIPS 

FREQUENTLY ASKED QUESTIONS

The product is covered by a limited warranty from Jackery for the original purchaser that covers the product from 
defects in workmanship and materials for 36 months from the date of purchase (damages from normal wear and 
tear, alteration, misuse, neglect, accident, service by anyone other than authorized service center, or act of God are 
not included).

During the warranty period and upon verification of defects, this product will be replaced when returned with 

proper proof of purchase.

WARRANTY

* Do not flex or bend the folding solar panels.

* Do not place folding solar panels in shading places, while tree shades, buildings, and any other obstructions 
should be minimized.
* Do not soak the solar panels in water or other liquid.
* Do not clean the solar panel with water, please gently wipe it with a damp cloth. 

* Do not use or store solar panels near open flames or flammable materials.

* Do not scratch the surface of solar panels with sharp objects.
* Prevent corrosive substances to damage solar panels.
* Do not step on or place heavy objects on the solar panels.
* Do not disassemble the solar panels.
* The output circuit of the solar panels must be correctly connected to the equipment. Please do not short-circuit 
the positive and negative poles. Ensure that there is no gap between the connector and the insulated connector. If 
there is a gap, sparks or electrical shocks will occur.
* Check the connection status of each component, including cables, wires and plugs.

Q: What kind of battery can be charged by these solar modules?

1, Jackery Explorer series
2, Sealed lead-acid battery
3, Colloidal lead-acid batteries
4, The open lead-acid batteries

Q: How to clean the solar surface?

Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the 

solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as 
possible from the solar surface to avoid a reduction in performance.

Q: Is this product waterproof?

This product can prevent daily water splashing. Please keep the product dry on a daily basis to ensure its service 
life.

Figure 4

Figure 5

3