SAFETY DECAL CARE
Keep Safety Signs Clean And Legible At All
Times.
Replace Safety Signs That Are Missing Or Have
Become Illegible.
Replaced Parts That Displayed A Safety Sign
Should Also Display The Current Sign.
Safety Signs Are Available From Your Distributor
Or Dealer Parts Department Or The Factory.
How to Install Safety Signs:
Be Sure That The Installation Area Is Clean And
Dry.
Decide On The Exact Position Before You
Remove The Backing Paper.
Remove The Smallest Portion Of The Split
Backing Paper.
Align The Decal Over The Specified Area And
Carefully Press The Small Portion With The
Exposed Sticky Backing In Place.
Slowly Peel Back The Remaining Paper And
Carefully Smooth The Remaining Portion Of The
Decal In Place.
Small Air Pockets Can Be Pierced With A Pin
And Smoothed Out Using The Piece Of Decal
Backing Paper.
TIRE SAFETY
Failure To Follow Proper Procedures When
Mounting A Tire On A Wheel Or Rim Can
Produce An Explosion Which May Result In
Serious Injury Or Death.
Do Not Attempt To Mount A Tire Unless You
Have The Proper Equipment And Experience To
Do The Job.
Inflating Or Servicing Tires Can Be Dangerous.
Whenever Possible, Trained Personnel Should Be
Called To Service And/ Or Mount Tires.
Always Order And Install Tires And Wheels With
Appropriate Capacity To Meet Or Exceed The
Anticipated Weight To Be Placed On The
Equipment.
The Rims And Tires Should Be Mounted On The
Feeder With The Valve Stem To The Inside. We
Use Reverse Disc Rims As A Protection That
Livestock Do Not Step On The Valve Stems And
Break Them Off. Be Sure You Have Proper Tire
Pressure And The Lug Nuts Are Properly
Tightened. Check Wheel Bearings On A Regular
Basis And Grease Semiannually.
LIGHTING AND MARKING
It Is The Responsibility Of The Customer To
Know The Lighting And Marking Requirements
Of The Local Highway Authorities And To Install
And Maintain The Equipment To Provide
Compliance With The Regulations. Add Extra
Lights When Transporting At Night Or During
Periods Of Limited Visibility.
Lighting Kits Are Available From Your Dealer Or
From The Manufacturer.
BEFORE OPERATION
Carefully Study And Understand This Manual.
Do Not Wear Loose-Fitting Clothing Which May
Catch In Moving Parts.
Always Wear Protective Clothing And Substantial
Shoes.
Keep Wheel Lug Nuts Or Bolts Tightened To
Specified Torque.
Assure That Agricultural Implement Tires Are
Inflated Evenly.
Give The Unit A Visual Inspection For Any Loose
Bolts, Worn Parts Or Cracked Welds, And Make
Necessary Repairs. Follow The Maintenance
Safety Instructions Included In This Manual.
Be Sure That There Are No Tools Lying On Or In
The Equipment.
Do Not Use The Unit Until You Are Sure That
The Area Is Clear, Especially Children And
Animals.
5
S
A
FE
T
Y
N
O
T
IC
E
SAFETY NOTICE
E
L
E
V
.
3
0
/3
6
(
C
A
T
)
O
P
E
R
A
T
O
R
'S
M
A
N
U
A
L
