11
Leveling the Ice Maker
It is important for the ice maker to be leveled in order
to work properly; otherwise water will not flow as it
should through the evaporator (ice mold). Ice
production will be less than normal, and operation
will be noisy. The ice maker can be raised or lowered
by four leveling legs on the bottom of the machine. If
you find that the surface is not level. You may need to
make several adjustments to level the machine. We
recommend using a carpenter’s level to check it.
1.
Place a carpenter’s level on top of the product to
see if the ice maker is level from front to back and
side to side.
2.
Adjust the height of the
legs as follows:
Turn the leveling legs to the right to lower that side of the ice maker.
Turn the leveling legs to the left to raise that side of the ice maker.
IMPORTANT: Once you are ready to install it in a cabinet or directly on the floor, you must
adjust the legs to level the ice maker.
Reversing the Door Swing
TOOLS NEEDED:
Flat screwdriver, Phillips screwdriver
IMPORTANT:
Before you begin, unplug the ice maker or disconnect power.
Summary of Contents for BBQ10700
Page 8: ...7 Component Locations...
