!!!WARNING!!!
Do not try to install this appliance without reading the “INSTALLATION
SAFETY PRECAUTIONS” section of this manual.
1. This grill is designed to use L.P. gas only. Only use this grill with L.P. gas and the
regulator assembly supplied by the manufacturer. This grill is supplied with a Natural
Gas Conversion Kit. When converting to Natural Gas, a qualified Gas installer should
perform all gas conversions. See conversion section of this manual.
2. The installation of this appliance must conform with local codes or, in the absence of
local codes, with the
National Fuel Gas Code, ANSI Z223. 1, or CAN/CGA-B149.2
Propane Installation Code.
3. The L.P. tank used must conform with the specification for L.P.-gas cylinders of the
U.S. Department of Transportation (DOT)
or
the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of
Dangerous Goods.
4. The motor must be electrically grounded in accordance with local codes or, in the
absence of local codes, with
the National Electrical Code, ANSI/NFPA 70-1990
, or
the Canadian Electrical Code, CSA C22.1
. Keep the power cord of the motor away
from the hot surfaces of the grill while in use. Remove and store the motor in a dry
place when not in use.
5. This grill is safety certified for use in the United States and Canada only. Never modify
to use in other places. Modification may cause serious body injury or property loss.
INSTALLATION SAFETY PRECAUTIONS
5
