Tools Required to Convert this grill from Propane Gas to Natural Gas (Tools not provided):
1. # 2 Phillips screwdriver
2. 9 and 7 mm wrenches
3. 13 mm wrench
4. ¾” wrench
5. Adjustable Wrench
The NG conversion kit is supplied with this grill:
Item Description Specification
Quantity
1
φ
1.44
4pcs
φ
1.14
1pc
2
NATURAL GAS CONVERSION
NG Orifice, Main Burner
NG Orifice, Rotisserie burner
The outdoor cooking gas appliance and its’ individual shut off valve must be disconnected
from the gas supply piping system during any pressure testing in excess of ½ psi (3.5 kPa).
The outdoor cooking gas appliance must be isolated from the gas supply by closing its’
individual manual shut off valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than ½ psi (3.5 kPa).
MAIN BURNER CONVERSION
1. Remove the Cooking Grids and Upper Flame Tamers.
2. Using a # 2 Phillips Screw Driver remove the screws that hold the main burners to the firebox rear
wall.
Use Screw Drive to remove the
screws on main burner, each
burner has 2 screws.
3. Using a 13 mm wrench undo all of the main burner orifices from the underside of the Control Panel.
9
