background image

A special message to our customers: 

 

Thank  you for choosing the Ja ckson  Grill for y our  new gas grill.  This appliance is

 

designed with quality components and we are confident that it will provide you with years of 

excellent  operation.  Please t ake  the time   to read the whole manual an

d  familiarize 

yourself with all of the features of the Jackson Grill.    This manual also contains important 

safety information and operation instructions.    Ensure that this manual remains handy to 

the  barbeque for qui ck  reference.  If you need 

to  obtain  replacement  parts  for your 

Jackson Grill, contact your local dealer. 

 

NOTE: It is normal for st ainless steel surfaces to discolor due to high heat given of f from 

the barbeque burners. 

 

Please take the time to fill out and return  the Ownership and Registration Card below .    It 

can be mailed to: 

 

Jackson Grills Inc. 

106 - 2480 Mt. Lehman Road 

Abbotsford, BC

V4X 2N3 

 

Or Fax:

 

1

-877-

855-5373

 

 

Please complete and return within 10 days.    Thank you. 

 

Mr. Mrs.  Ms. Miss 

 First Name: 

Initial: 

Last Name: 

Street: 

 

Apt. #: 

City: 

State/Province: 

Zip/Postal: 

Phone: 

Email: 

Date of Purchase: 

Dealer: 

Model: 

Serial #: 

Comments: 
 
 
 
 

 

Thank you for taking the time to fill out this Ownership and Registration Card 

   
 
 
 

Summary of Contents for JLSBI























Reviews: