RETAIN SAFETY INFORMATION
3
ALWAYS roll the threader stand on a smooth, level, firm surface. Tipping
of the threader stand may occur if rolled over unlevel surfaces.
ALWAYS operate the threader stand on a level surface.
Threaders MUST be mounted to a stable, properly assembled stand
before operating or transporting. Follow all assembly instructions
provided.
Threader MUST be properly balanced on the stand.
ALWAYS check to ensure the threader you mount to the stand is
mounted to the correct holes in the stand. See page 5 for threader
mounting positions.
IMPORTANT SAFETY INFORMATION
Follow ALL safety information provided by the manufacturer.
WARNING
DANGER
CAUTION
This manual should be read and understood by all personnel who operate or service this
Threader Stand. Failure to understand how to safely assemble and use this unit could result
in injury or death. This unit should only be operated or serviced by qualified personnel.
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
WARNING
DANGER
CAUTION
MODEL DESCRIPTIONS
Model No.
Description
Will fit RIGID
®
*
Model #
224W
Rolling Stand with tray
535 – 2001 and newer
1224
235W
Rolling Stand with storage box
535 – 2001 and newer
1224
*RIGID
®
is a registerered trademark of Emerson Electric, Inc.
MAINTENANCE
Grease the wheel bearings with a good gauge of M.P. grease as needed.
