ASSEMBLY INSTRUCTIONS
1. Attach front and rear cross members (18,20) to side frames (21,22) with 3/8" - 16 × 1"
hex head cap screws and 3/8" - 16 hex nuts (6,24) as shown in Figure 1. Be sure
crossmembers are assembled as shown in Figure1.
2. Install 2 - axles (16) and secure with 1/2-13 hex nuts and 1/2" lock washer (4,5). Place
wheels onto axles, place 1 washer (2) on each axle (16) and secure with cotter pins (8).
3. Depending on the unit you have ordered, mount either the tray (19) or the storage box
(26) with the 1/4 - 20 × 1/2" slotted round head machine screws and 1/4" flat washers (7,8).
Attach the handle of the storage box (27) with M8 × 12 hex head screws and M8 lock
washers (28,29).
Figure 1
4
