Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
4
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames with a mild solution of soap and water; rinse thoroughly. Do not use
bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Table: 100 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
Always use an umbrella base to secure umbrella. Do not store anything on
glass tabletop. Ensure the “o” ring is in place in the umbrella hole in the
glass top before inserting umbrella. Make sure umbrella is in the closed
position when not in use and during high winds. Use furniture covers or store
indoors during cold or inclement weather.
Fa (1 spare)
Short Bolt
Fb (1 spare)
Long Bolt
Fc (1)
Allen Wrench
Fd (1)
Umbrella
Insert Piece
