Jacob Jensen 5, User Manual

6

Trouble shooting

Q1. 

My telephone does not work!

A1. 

Make sure the coiled cord and the line cords are connected 

securely to the jacks.

A1. 

Make sure the batteries are fresh and inserted with correct 

polarity.

A1. 

Push the hook switch once and wait for the dialling tone 

again.

A1. 

If more than one telephone or internet are connected to the 

same telephone line, make sure the other telephones are 

put on hook. 

A1. 

Try to connect another telephone to the telephone socket. If 

the problem persists, it appears that there is a problem with 

your telephone line system. 

Please consult your network provider.

A1. 

Make sure the MUTE button is inactive in case the person 

you are calling cannot hear you.

Q. 

My phone does not ring!

A. 

Make sure the line cords are connected securely to the jacks.

Q3. 

My telephone does not display the caller’s telephone 

number.

A3. 

Make sure your phone line is provided with a caller ID 

function from the network provider. 

A3. 

The caller may have a secret number or suppressed the caller 

ID number when making an out-going telephone call.

A3. 

If a call is made from abroad or the like, the caller’s number 

cannot be displayed.

Specifications

Power source 

: 4 pcs. “AA” batteries

Battery life 

: app. 8 months

Dimensions (incl. table stand) 

: 00 x 135 x 85 mm

Weight (incl. table stand) 

: app. 830 g

-  The contents of this manual are subject to change without notice.

-  The manufacturer and its suppliers accept no liability whatsoever 

for any damage, expense, loss of profits or any other damage 

incurred as a result of using this product.

IMT5US.

406

008

Assembling the table stand and telephone cords

Slide the canals of the table stand 

into the tracks of the base. 

The table stand is mounted when 

you hear a click.

Fit the modular contact of the 

coiled cord into the plug of the 

telephone. 

Fit the modular contact of the 

coiled cord into the plug of the 

handset. 

There are two telephone line cords 

enclosed. Connect the wide line 

cord to the base and to the battery  

compartment (OUT).  

Connect the narrow line cord to 

the battery compartment (IN) and 

to the telephone wall outlet.

Disconnect the coiled cord and the 

wide line cord from the base.

Push the button inside the square 

hole next to the modular jack 

using a pen or a finger, and pull 

the bracket away from the base at 

the same time.

Disassembling the table stand