background image

8

Handset / Base speaker mode and Handset / Base intercom 
1.  Press            on the cordless handset to enter speaker 

mode; press            again will enter non-speaker mode 

2.  For the base, picking up the corded handset will enter 

into non-speaker mode; press            and put the corded 
handset back on the base to enter into speaker mode. 

3.  From Base to cordless Handset:
     When Base is in speaker mode or handset mode,  press  

            on the handset and press            on the base, it will 
enter handset non-speaker mode.

4.  From cordless Handset to Base: 
   When Handset is calling, press            on the base or pick 

up the corded handset,  then press             key on the  
handset.

MAINTENANCE

The phone has been manufactured using the very latest 
technology and the highest quality components and 
workmanship, under ISO9001 quality control procedures. 

It can be relied on to provide many years of trouble-free 
service, especially if these simple tips are followed:

•  Handle with care, avoiding hard knocks and shocks.
•  Do not expose this product to dust, strong sunlight, 

humidity, high temperature, or mechanical shock.

•  Do not use corrosive or abrasive cleansers on this product. 

Keep the unit dust free by wiping it with a soft, damp 
cloth.

•  Do not tamper with or attempt to modify the phone, it 

would make it unsafe to use. Should any service difficulties 
or faults be encountered, the following list may help you 
identify and remedy problems. In some cases, however, it 
may be necessary to call the distributor from whom you 
purchased it. 

Summary of Contents for HT60D













Reviews: