background image

9

TROUBLESHOOTING

1.  No dialing tone on handset

1)  Please check the telephone network,
2)  Please check the connection of handset cord and 

straight line cord 

2.  No ringing or continuous ring. 

Please check the telephone line or the number of phones 
connected in parallel. 

3.  Noise during call.

Please check the telephone line or please check the 
handset cord 

4.  Cordless handset can not be switched on.

1)  If there is an error sound after pressing            (green 

button), it means  that cordless handset wasn’t 
registered to the phone base, you may need to 
register it again.

2)  Cordless handset and phone base’s distance beyond 

range,  need to move cordless handset closer to base.

3)  Batteries do not have enough power, need to recharge

5.  If there is any problem, please don’t open the phone 

body, please contact us or our local representative. 
Thanks.

BATTERY

1.  The battery should be charged for over 8 hours for the 

first time or if the battery hasn’t been used for some 
time.

2.  After 3 or 4 charges, the new battery will reach full 

capacity.

3.  If the phone will not be used for a long time, please 

remove the battery and keep it in a dry place.

4.  The battery should be changed after 20 months using a 

genuine battery from a Bittel supplier.

Summary of Contents for HT60D













Reviews: