11
RESTORE FACTORY
When the phone is powered on, after it boots up
successfully, enter MENU, then choose 18 and enter the
phone pa OK to restore factory settings, then click
Select to reboot the phone.
POE POWER SUPPLY INSTRUCTIONS
The phone can view the POE power supply level by
managing the POE switch. If powering the sound or charging
stand, the power level is 0 or 6 and the maximum value is
12.95W; If only powering a phone, the power level is 2 and
the maximum value is 6.49W.
The power level of this type is 2.
INSTALLATION ATTENTION & MAINTENANCE
The phone has been manufactured using the very latest
technology and the highest quality components and
workmanship, under ISO9001 quality control procedures.
It can be relied on to provide many years of trouble-free
service, especially if these simple tips are followed:
• Handle with care, avoiding hard knocks and shocks.
• Do not expose this product to dust, strong sunlight,
humidity, high temperature, or mechanical shock.
• Do not use corrosive or abrasive cleansers on this product.
Keep the unit dust free by wiping it with a soft, damp
cloth.
• Do not tamper with or attempt to modify the phone, it
would make it unsafe to use. Should any service difficulties
or faults be encountered, the following list may help you
identify and remedy problems. In many cases, however, it
may be necessary to call the distributor from whom you
purchased it.
