MAINTENANCE 8
33
8.3
ENGINE OIL ______________________________________________________________
Check the engine oil at the start of each day, before
starting the engine. If the oil level is low, remove oil filler
cap and add oil as required.
Perform initial oil change after first 50 hours of operation
and every 75 hours thereafter. See Engine Manual.
Use only engine oils with API classification CD/CE.
Figure 8A
8.4
DIESEL AIR FILTER ________________________________________________________
Check the service indicator daily. If red band appears in
the window (C) replace the element.
Do not remove the element for inspection or
cleaning. Unnecessary removal of the filter increases
the risk of injecting dust and other impurities into the
engine.
When service is required, first clean the outside of the
filter housing; then remove the old element as gently as
possible and discard.
1.
Carefully clean the inside of the filter housing without
allowing dust into the air intake.
2.
Inspect the new element. Do not use a damaged
element and never use an incorrect element.
3.
Assemble the new element and make sure it seats
properly. Reset the indicator by depressing button
(D).
4.
Reassemble cap making sure it seals completely
around the filter housing. Dust evacuator must be
facing down.
5.
Check all hoses and air ducts. Tighten hose clamps.
Figure 8B
Above 77°F (25°C)
SAE 30W or SAE10W30/10W40
32 to 77°F (0 to 25°C)
SAE 20W or SAE 10W30/10W40
Below 32° (0°C)
SAE10W or SAE 10W30/10W40
Diesel Engine Dipstick
Safe Operating Range
⎧
⎨ ⎪ ⎪
⎪
⎪
⎩
C
D
