18
Installing Cab Options
Attach the power wires.
Take the cab ground wire (35) and run it to the
machine ground, located on the rear left side of the engine. Ensure that the wire
does not interfere with any moving parts of the engine.
Figure Twenty-one
——————————————————————————————————
Take the loose end of the jumper wire and attach it to the machine power source
(36). Take the cab power wire and the breaker and attach them to the machine
power source below the jumper wire connection (37). Ensure that the power wire
does not interfere with any moving parts of the engine.
Figure Twenty-two
——————————————————————————————————
