August 2015©
Jacobsen HR9016 ROPS Cab Operator Manual
Operating Instructions
Important
The following section locates, identifies and briefly describes the functions of all cab controls.
All operators should familiarize themselves with control location and function prior to operating
the mower. Failure to do so may result in unsafe operation of the mower and possible injury or
death to operators and bystanders.
There are two switch plates located in the headliner. The following switches are available and
their functionality is described.
Left Switch Plate
1.
Front Wiper Rocker Switch (standard)
Low position: Off
High position: On
Note: indicator light activates when wiper is on.
2.
Rear Wiper Rocker Switch (optional)
Low position: Off
High position: On
