DECALS 3
14
Familiarize yourself with the following decals. They are critical to the safe operation of the
machine. REPLACE DAMAGED DECALS IMMEDIATELY.
4199140
4181863
WARNING
Read manuals before operating mower.
Engage lockup pins with wing arms in raised
position for transport, storage, or maintenance.
WARNING
To prevent burns, do not touch muffler or muffler
shield. Temperatures may exceed 150° F (66° C).
WARNING
Read manual for service instructions.
• Wing arm canisters are a stored energy device. To prevent injury, do not
disassemble canister. Contents under extreme load.
• Open tow valve before towing mower. Do not tow over 2 MPH (3.2 kph).
• Radiator contains a 50/50 mixture of water and ethylene glycol based
antifreeze. Drain and discard coolant yearly.
• Maintain fluid level in radiator recovery tank between FULL and LOW mark
when engine is cold.
• Clear the radiator core and radiator screen of any dirt or grass clippings.
• Check the engine oil level each time you stop for fuel.
• Do not use start assist fluids.
Deck Flip Up Procedure
1.
Rotate anti-sway mechanism downward.
2.
Start tractor engine and raise deck until gage wheels are off the ground.
3.
Remove cut height adjustment pins from rear gage wheel arms.
4.
Raise deck to full raised position.
5.
Turn mower engine off.
6.
Rotate front of deck upward until support is securely latched.
4257090
Summary of Contents for HR 9016 Turbo
Page 18: ...3 DECALS 17...
Page 53: ...ADJUSTMENTS 9 52 Figure 9D K J H G G...
Page 69: ...NOTES 12 68 12 NOTES...
