en-35
MAINTENANCE AND LUBRICATION 5
Check The Engine Coolant Level
(a)
The level of coolant in a cold expansion tank must be between the
indicators.
(b)
If you need to fill the tank, remove the plastic cap and fill with the
correct coolant mixture (see section 8.1).
(c)
Replace the plastic cap.
How To Change Coolant
(a)
To drain coolant, open the drain valve on the
engine block (F) and remove the hose from the
radiator. Drain the engine coolant into a container.
(b)
Close the Engine drain valve (F) and put the hose
on to the radiator. Make sure all the hose clips are
tight.
(c)
Fill the cooling system with the correct coolant
mixture, see section 8.1. Fill the system through
the radiator cap.
(d)
The level of coolant in a cold expansion tank must
be between the indicators.
(e)
Run the engine for approximately 5 minutes or until the thermostat opens.
(f)
Check the level of coolant in expansion tank. Fill the tank if more coolant is needed.
CAUTION
Anti-freeze Can Damage Your Skin. Use the applicable safety equipment. If Anti-freeze Touches the
Skin, Clean The Area Immediately.
CAUTION
Discard of used Anti-freeze As Shown In Local Safety Regulations.
A
B
F
D
E
C
Summary of Contents for Ransomes MP493
