4-101
4
O
PE
R
A
TI
O
N
AN
D
A
D
JU
ST
M
ENT
S
ARBUS 1000
Chemical container rinse
Package rinsing
• Put water into the package until reach-
ing of its capacity. Close the package and
tighten to avoid leaking during shaking.
• Vigorously shake the package, in all di-
rections (horizontal and vertical) for ap-
proximately 30 seconds, to remove the
final product residues.
• Remove the package lid and carefully
place water for washing in the sprayer
tank.
• Maintain the package over the opening
of the sprayer tank until its contents are
empty.
• Next, punch hole into the package to
avoid its reuse.
• Take care for preventing damages on the
package label.
NOTE:
To keep from contaminating the
water and the clean water tank
tap during the filling of the che-
mical container, hold the contai-
ner at least 5 cm away from the
tap and fill the chemical container
with water up to 1/4, as shown.
ATTENTION!
Use the recommended protective
clothing for this operation.
2 in
1/4