4-48
4
O
PE
R
A
TI
O
N
AN
D
A
D
JU
ST
M
ENT
S
ARBUS 270
Filler unit (Optional)
• Pour 20 liters of clean water into the
sprayer tank.
• Remove the hose (1) from the pump and
connect the filler hose (2) in its place.
• Put the filler unit (3) in the water source
and the end of the discharge hose (4) into
the tank opening.
• Engage the PTO at 540 rpm.
• After finishing the filling operation, con-
nect again the hose (1) to the pump.
• Run the sprayer for five minutes before
starting to spray, so that the chemical
mixtureis homogeneous.
ATTENTION!
If using wettable powder, turn off the pump only after the tank mix is done in order
to avoid product decantation.
ATTENTION!
The sprayer filling operation must be done in places appropriate for this purpose or
through appropriate vehicles (trucks, trailers, etc.).
Never collect water from rivers, lakes, dams, streams, brooks, etc. by using the
sprayer’s return system.
1
3
2
