4-60
4
O
PE
R
A
TI
O
N
AN
D
A
D
JU
ST
M
ENT
S
ARBUS 270
Chemical container rinse
• The chemicals are conditioned in appro-
priate packages for each type of product.
• After use, these should be discarded in a
safe manner, in order not to intoxicate pe-
ople nor contaminate the environment.
• It is very important that, BEFORE DISCAR-
DING EMPTY PACKAGES, that the leftover
product be removed AND, NEXT, THE PA-
CKAGE SHOULD B PUNCTURED SEVERAL
TIMES, TO AVOID REUSE.
• The packages made from metal, plastic
and glass should be washed in order to
decontaminate them.
• To ease this important package washing
operation, JACTO installed in its tractor
sprayers a device that aids this operation.
This device internally washes the package
with pressurized water, eliminating most
of the residues.
Package rinsing
• Pot water into the package until reaching
¼ of its capacity. Close the package and
tighten to avoid leaking during shaking.
• Vigorously shake the package, in all di-
rections (horizontal and vertical) for ap-
proximately 30 seconds, to remove the
final product residues.
• Remove the package lid and carefully place
water for washing in the sprayer tank.
• Maintain the package over the opening of
the sprayer tank until its contents are empty.
• Next, punch hole into the package to
avoid its reuse.
• Take care for preventing damages on the
package label.