Assembly Manual
44
Install the sprayer original wheel. Make sure the tire
tread pattern faces the opposite direction the sprayer is
going to move.
After the wheel is installed, tighten the fastening nuts.
Repeat the previous instructions for the wheel on the
other side.
The wheel fastening nuts must be tightened to a 450
N.m. torque.
Replacing the wheels
NOTE
While assembling the tire to the wheel, if
cannot hold it, do not try to hold it, on the
contrary, let it fall.
With the safety strap hung on the hoist tackle, lift one
of the sprayer sides and remove the fastening nuts and
the iron wheel.
Summary of Contents for BK3024
Page 2: ......
Page 4: ......
Page 79: ...BK 3024 79 Picture of the PPE Compartment assembled Assembling the PPE Compartment...