9/67
8.4. Shoulder strap adjust (16c and 20c)
The tank is contoured for the operator comfort. The shoulder
straps can be quickly adjusted to properly position the sprayer
on the operator’s back.
1.
Mount the strap belt onto the tank as shown in position A.
2.
Hook the buckle of the strap to the plastic couplers locat-
ed at the side of the sprayer’s base, as shown in position B.
3.
To tighten the strap belt, hold the strap buckle firmly with
one hand and pull the handle downward with the other
hand. To loosen the strap belt, hold the buckle firmly with
one hand and pull the strap upward with the other hand.
8.5. Shoulder strap adjust (8c)
1.
Mount the strap belt onto the tank as shown in position A.
2.
Finally, adjust the intermediary buckle as desired, as
shown in B. To tighten the strap belt, hold the strap buckle
firmly with one hand and pull the handle.
B
A
4.
Pour the solution into the tank while filling with water.
8.6. Turn On/Off the sprayer
NOTE: Before starting to spray, retighten the hose clamps to
avoid contamination of the operator and of the environment.
To turn on the sprayer:
1.
Turn on the sprayer using the ON/OFF switch in the elec-
tric panel.
2.
Place the lance with the trigger valve pressed above the
base of the sprayer until the spray jet begins to spray con-
tinuously.
3.
Direct the spray lance to a safe position and open the trig-
ger valve to begin spraying.
To turn off the sprayer:
1.
Shut off the trigger valve. The internal pump pressure
switch will automatically turn off the pump (the sprayer is
said to be in idle state).
2.
Turn off the sprayer using the ON/OFF switch in the elec-
tric panel.
3.
Direct the spray lance to a safe position and open the trig-
ger valve to release pressure before storing the sprayer.
8.7. Application
Wear appropriate protective clothing
Do not contaminate water
A
B
Handle
Buckle
Buckle
