Jacto SP 312 / SP 416
Jacto SP 312 / SP 416
Assembly
13
Optional accessories
4
Rod
Lever
Shaft
Locked rings
Flat washers
Locked ring
* Do not overtighten the screw cap.
1∙
Lance
2∙
Trigger valve
Push the lance into the trigger valve
and secure it with the screw cap.
11
12
A
Before using the equipment, tighten the
fastening nut (A).
IMPORTANT:
This operation must be
done by the hand. Do not use any type
of tool.
> Attaching the lance to the trigger valve
> Tightening the fastening nut
01
07
08
06
02
03
04
05
Item
number
Part
number
Recommended use
01
761882 Spray hood: prevents nonselective herbicides from drif-
ting.
02
902296 Boom 500: improves the coverage and increases the pro-
ductivity.
03
907873 Flexible boom: holds the required shape for better cove-
rage.
04
728139 Wand extension 600
05
100016 Double nozzle holder
06
834309 Flow calibration bottle
07
336115 Y nozzle
08
1197164
1197163
Ecovalve: Green (1,0 kgf/cm
2
)
Ecovalve: Blue (2,0 kgf/cm
2
)
∙ L
ightly grease the orifice on the chamber
top.
∙ Install a flat washer on the shaft and
rod.
∙ For easy assembly, install the lever on
the shaft and the rod on the chamber top
at the same time.
∙ Install the other flat washers on the
shaft rod and lock with the locked ring.
> Installing the pump lever