Getting Started
Bluecube Media Player 6500-915
www.aquaticav.com
3
1.1 Contents
6500-915 BlueCube Media Player
Wiring Harness (AQ-UNH-2)
Owner's Manual
1.2 Connections
1: 12-pin Watertight Harness
The 12-pin harness supplies power and ground connection to the BlueCube Media Player and four (4)
speaker channel output connections from the BlueCube Media Player.
2: Spa Controller
This must be connected to the spa controller.
3: Subwoofer Output
Connect to a subwoofer amplifier.
4: 3.5mm Auxiliary Input
Connect to an audio source, such as MP3 player or other audio line out.
5: 8-pin DIN Cable for remotes
Connect to optional wireless or wired Remote Control (sold separately).
6: EXT Trigger
Provide 12Vdc when EXT trigger is pressed on remote control (sold separately).
7: Power On LED
When the BlueCube is powered On, the LED will lit.
8: Bluetooth Antenna Connection
Connect to the Male SMA connector of the Bluetooth antenna. Do not apply excess torque to the SMA
connector (no more than 0.5N-m). Use hands to tighten the connection. (No wrench is used)
12-pin Watertight Harness
1
4
5
6
8
2
3
6
Connect SPA controller (Black)
Connect To Subwoofer (brown)
3.5mm Female Auxiliary Input
8-pin DIN cable for Remote (black)
External Trigger (brown)
Power On LED
