8
Charging Your Cleaner
A
Inserting the Filter Cone
B
Attaching the Debris Chamber
C
Attaching the Vacuum Head Assembly
D
Attaching Pole Adapter & Pool Pole
E
F
G
Maintenance
H
Please respect recycling regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment.
Do not dispose them in unsorted waste bins. For items containing removable batteries, remove batteries before disposing of the product.
Environmental Recycling Programs USA
Help protect the environment.
Turning the Cleaner ON and OFF
Push for ON / OFF
Remove adapter
Only use the battery charger supplied with the cleaner.
Before Using in Water
• Always remove the charging adapter before using in water.
• Turn unit ON first, then use it in water.
Cleaning the Filter Bag
• You should remove and clean the Filter Bag following each use (Figure H.1).
• Don’t scrub the bag against itself while rinsing it.
Long Term Storage
• Always clean the Debris Chamber and Filter Bag before storing.
• Always store and charge your cleaner in a cool, dry indoor shelter.
• Recharge the cleaner indoors for 4 hours after each month of inactivity.
• Never leave your charger connected to the cleaner for more than 24 hours.
Initial Charge
4 Hours
Recharging (After Complete Discharge)
4 Hours
Maximum charging time should not exceed
24 Hours
When fully charged, light will blink green for 1 second
every 30 seconds.
Battery charger Input...........................................................................100-240V-50-60HZ, 0.3A Maximum
Specifications
Battery charger Output.............................................................................................................12.6V, 1.A
Water temperature range................................................... Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth...........................................................Maximum 12 ft. (3.5 m), Minimum 10 in. (0.25 m)
Battery Technical Data...................................................................11.1V, 2200mAh, 24.42Wh, 3S1P Li-Ion
Charge temperature......................................................Maximum 100°F, (37.7°C) Minimum 50°F, (10°C)
End of Life Disposal / Recycling Directive
1. Vacuum Head
2. Vacuum Head Adapter
3. Debris Chamber
4. Filter Bag
4a. Filter Frame
5. Motor Box
6. Cleaner Body
7. Pole Adapter
8. Charger
P30X006
P22X002
CENTA021
P22X022XF
P35X021
P30X003LI
P22X061
LC099-3S6X099
