ENGLISH
Controlling Whirlpool Action
The whirlpool action in your bath is influenced by three
factors – direction of flow, force of water, and force of air. All
baths manufactured by Jacuzzi Whirlpool Bath
©
are equipped
with fully adjustable AccuPro
®
jets or TheraPro
®
jets, which
are adjustable for all three factors. Some baths have addi-
tional directionally adjustable jets which can be adjusted for
direction and flow of air only.
Direction:
To change the direction of the water flow, swivel
the jet nozzle to the desired angle. The jets can be directed
individually toward any location on your body to provide a
hydromassage. The jets can also be adjusted so that they
all point in the same direction (clockwise or counterclock-
wise) to circulate the water in a circular motion around the
bath, causing a total whirlpool effect.
Water Force:
The high volume, fully adjustable jets can
be adjusted to control the force of the water coming into the
bath. For robust action, increase the force of the flow by
rotating the jet handles to the left (counterclockwise). For a
more gentle effect, rotate the handles to the right (clockwise).
Never run the whirlpool system with all the jets closed.
Force of Air:
Buttons located on the bath control panel
serve as controls for the air induction system. The intensity
of the hydromassage whirlpool action is determined by the
amount of air inducted into the water. As the amount of air is
increased, the hydromassage action increases.
RapidHeat
TM
Operation
Once the heater is installed and the whirlpool pump is
operating, the heating function is totally automatic. The heater
will help maintain the temperature of the water in the bath.
Vacuum Switch
The heater is equipped with a preset vacuum switch which
will not allow the heater to turn ON if the pump is not running
with water flowing through the whirlpool system.
High-Limit Switch
The heater includes an exclusive High-Limit switch. This
safety circuit will not false trip from hot tap water. It will only
turn OFF the heater if the thermostat fails. To reset, press
the button. If the high-limit trips frequently, contact your Au-
thorized Electrical/Mechanical Service Provider. Visit our
web site at http://www.jacuzzi.com/ to find a Service Pro-
vider.
11
Jacuzzi Whirlpool Bath
©
BR28000B 4/05
FULLY
ADJUSTABLE
JET
PUSH TO RESET
OVER HEAT
PROTECTION
HIGH LIMIT RESET
HEATER ON
HEATER ON
